Optional Hardware

Optional Series 100 - Chrome Plated Brass Hardware
Hinges are recessed heavy duty, chrome plated brass, non-handed with a gravity type cam action. Latching is accomplished by means of a heavy-duty chrome plated brass surface mounted latch. All wall and "U" brackets are chrome-plated brass.

Optional Series 210A - Full Length Aluminum Brackets
Mounting brackets are heavy-duty full-length extruded aluminum, all wall brackets secured to wall at 12-inch centers. Fasteners are chrome-plated steel or stainless steel depending on project specification.

Optional Series 220S - Full Length Stainless Steel
Brackets are one piece full-length 18-gauge stainless steel hemmed together to form a continuous "T" or "L" bracket for maximum mounting strength.

Optional Series 300 - Cast Stainless Steel Hinges
Hinges are recessed heavy-duty cast stainless steel, fully adjustable with a gravity type cam action. Latching is accomplished by means of a surface mounted cast stainless steel latch. All mounting brackets are formed 14-gauge (type 304) satin finish stainless steel. All fasteners shall be stainless steel.

Optional Series 400 - Surface Mounted Hinges
Wide ranges of surface mounted hinges are available to meet your specifications and retrofit applications. Choose from Tex-Lam #420 stainless steel surface mounted with cam, #430 chrome plated brass surface mounted with cam, #450 stainless steel piano hinge with emergency access or #470 aluminum square barrel wrap-around hinges.

Optional Series 500 - Stainless Steel Heavy Duty
Institutional hardware hinges are 18-gauge surface mounted continuous piano hinges 2-inch wide, with 1/8-inch diameter pin (type 304) in a satin finish stainless steel to run the full height of the door, non-handed, with no cam action. Latching is accomplished by means of a surface mounted 11-gauge stainless steel slide latch that latches into an 11-gauge heavy-duty keeper. Doors are mounted with two poly coated 14-gauge doorstops. A stainless steel coat hook and bumper are furnished with each door. The 18-gauge stainless steel wall brackets are hemmed together to form a continuous "T" or "L" bracket for maximum mounting strength.